Cas Confector

B16.24?2006 Cast Copper Alloy Pipe Flanges and Flanged Fittings, Class 150,
300, 400, 600, 900, 1500 and 2500 .... 125 pound cast iron, ASME B16.4, may be
used in lieu of malleable iron, except for steam and steam condensate piping. ....
G. Manual Radiator/Convector Valves: Brass, packless, with position indicator.

B16.24?2006 Cast Copper Alloy Pipe Flanges and Flanged Fittings, Class 150,
300, 400, 600, 900, 1500 and 2500 .... 125 pound cast iron, ASME B16.4, may be
used in lieu of malleable iron, except for steam and steam condensate piping. ....
G. Manual Radiator/Convector Valves: Brass, packless, with position indicator.

B16.4?06 Gray Iron Threaded FittingsB16.18-01 Cast Copper Alloy Solder joint
Pressure fittings ..... Body: Cast iron, ASTM A126, Class B. Malleable iron, ASTM
A47 electro-plated, or ductile iron, ASTM A536, Grade 65?45?12 electro-plated. b.
.... I. Manual Radiator/Convector Valves: Brass, packless, with position indicator.

1.4 Submit Material Safety Data Sheets (MSDS) and product data for all finishing
products to be utilized on site. 1.5 Submit two painted .... Paint interior surfaces of
air ducts [and convector and baseboard heating cabinets] visible through grilles
and louvers with one coat of flat black paint to visible surfaces. Paint dampers ...

C. "Exposed surfaces" includes areas visible when permanent or built-in fixtures,
convector covers, covers for finned tube radiation, grilles, and similar
components are in place. Extend coatings in these areas as required to .... (3.785
L) or 1 case, as appropriate, of each material and color applied. PART 2
PRODUCTS.

B. Product Data: Submit manufacturer's catalog sheets, brochures, performance
charts, specifications and installation instructions for Convector Radiators. 1.03
QUALITY ... Mechanically bond tubes to cast iron headers, or silver braze to cast
bronze headers; each header complete with tappings as required. Design ...

ALUMICOR GUIDE NOTE: Co-ordinate the following paragraph with the
drawings to ensure that required mechanical and electrical equipment is
adequately indicated. .3 Reinforce infill panels to receive [convector cabinet] [
finned tube radiation cabinet] [electrical component] brackets and attachments as
indicated.

In case of any discrepancies, the hard copy will be considered by the Agency in
evaluating the Proposal, and the electronic version is provided for the Agency's
administrative convenience only. A Proposal ...... Sufficient floor-level heaters
shall be provided that evenly supply convector air across the length of the bus.
Control ...

Time being of the essence of this contract, and a material consideration thereof, it
is mutually agreed by the parties hereto in case of the Contractor's failure to
complete the construction within the time specified the Owner will be damaged
thereby. The Contractor shall commence performance of its activities on the site
under ...